8-port 10 / 100 Mbps
 Desktop
 Unmanaged

SKU: FSD804P Categories: , ,

Model: Planet FSD-804P

 

8-Port 10/100Mbps with 4-Port PoE Switch

 

Department/Workgroup PoE Switch

Providing four 802.3at PoE+ in-line power interfaces, the FSD-804P can easily build a power source that centrally controls the enterprises’ IP phone systems, IP camera systems and wireless AP systems. For instance, up to 4 cameras can be installed around the corner in the company for surveillance demands or up to 4 wireless APs can be built to have a wireless roaming environment in the office. Without the power-socket limitation, the FSD-804P makes the installation of cameras or wireless APs more easily and efficiently.

 

Features

Physical Port

  • 8-port 10/100BASE-T Fast Ethernet RJ45 copper
  • 4-port IEEE 802.3at/af PoE Injector (Port-1 to Port-4)

Power over Ethernet

  • Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
  • Up to 4 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Each port supports 53V DC power to PoE powered device
  • 60-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m with standard mode, 200m with extended mode

Switching

  • Hardware based 10/100Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • IEEE 802.1Q VLAN transparency
  • Hardware DIP switch for “Standard” and “Extend” mode selection; the “Extend” mode features 30-watt PoE transmit distance of 200m at speed of 10Mbps (Only for Port1 – Port4)

Hardware

  • 8.5-inch desktop size, 1U height, rack mountable
  • LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
  • Fanless design
  • Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)

Specifications

HARDWARE SPECIFICATIONS
Hardware Version4
10/100BASE-TX MDI/MDIX Ports8
PoE Injector Port4 ports with 802.3at/af PoE injector function with Port-1 to Port-4
Switch ArchitectureStore-and-Forward
Switch Fabric1.6Gbps/non-blocking
Switch Throughput@64 bytes1.19Mpps@64 bytes
MAC Address Table1K entries, automatic source address learning and aging
Flow ControlIEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
LEDSystem:
 Power (Green)
 PoE max. (Green)
10/100BASE-T RJ45 Interfaces:
 10/100Mbps LNK/ACT(Green)
 PoE Interfaces:
 PoE-in-Use (Orange)
DIP SwitchSelectable operation mode
■ Standard
■ Extended
Dimensions (W x D x H)215 x 133 x 42 mm (1U height)
EnclosureMetal
Weight880g
Power RequirementsAC 100~240V, 50/60Hz, 2A max.
Power Consumption/DissipationMax. 65 watts/223 BTU
Thermal FanFanless
POWER OVER ETHERNET
PoE StandardIEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply TypeEnd-span
PoE Power OutputPer port 53V DC, 600mA. max. 30 watts
Power Pin Assignment1/2(+), 3/6(-)
PoE Power Budget60 watts
Max. Number of Class 2 PDs4
Max. Number of Class 3 PDs4
Max. Number of Class 4 PDs2
STANDARDS CONFORMANCE
Regulatory ComplianceFCC Part 15 Class A, CE
Standards ComplianceIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x Flow control and back pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy Efficient Ethernet (EEE)
ENVIRONMENT
OperatingTemperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
StorageTemperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)