Ultra-high-speed, Next-generation Wireless AP for Enterprises
PLANET WDAP-W7200AC, an enterprise PoE access point, features the latest 802.11ac wireless technology, advanced management functions and superior encryption standard yet cost-effectiveness. Meeting today’s demand for advanced performance and security, the WDAP-W7200AC includes multiple SSIDs, WPA / WPA2, RADIUS MAC authentication and so forth. With the female reverse polarity SMA connectors, the WDAP-W7200AC can suitably and correctly be connected to external antennas and boosters in such wireless environments as warehouses, campuses and enterprises.


Extraordinary 11ac Wireless Technology
The WDAP-W7200AC supports IEEE 802.11a/b/g/n/ac dual band standards with 2T2R MIMO technology; therefore, it provides the wireless speed up to 300+866Mbps (2.4GHz+5GHz), which is 16x faster than the 11a access point at 5GHz frequency and 5.5x faster than the 11g access point at 2.4GHz frequency. Moreover, the WDAP-W7200AC is equipped with a Gigabit Ethernet port. Compared with the general wireless APs, the WDAP-W7200AC offers faster transmission speed for the network applications and less interference to enhance data throughput. The incredible wireless speed makes it ideal for handling multiple HD movie streams, high-resolution on-line games, stereo music, VoIPs and data streams at the same time stably and smoothly.

SKU: WDAPW7200AC Categories: ,

External High Gain Antenna and 11ac Technology Bring Excellent Performance
The WDAP-W7200AC is equipped with 5dBi detachable high gain antennas which provide strong signal and excellent coverage even in the wide-ranging or bad environment. With the RP-SMA connectors, the external antenna such as omnidirectional or unidirectional or higher gain antenna enables to establish various highly-reliable applications. Its adjustable transmit power enables the administrator to flexibly reduce or increase the output power for various environments, thus reducing interference to achieve maximum performance. To experience extremely high-speed performance, the WDAP-W7200AC adopts IEEE 802.11ac technology to extend the 802.11n 40MHz channel binding to 80MHz and the implementation of 256-QAM modulation where higher transmitting/receiving rates go up to 867Mbps in 5GHz less interference frequency band. In addition, the WDAP-W7200AC is equipped with Gigabit LAN port to eliminate the restriction of 100Mbps Fast Ethernet wired connection to let users fully enjoy the high speed provided via wireless. The IEEE 802.11ac also optimizes MU-MIMO (Multi-User MIMO) mechanism to serve multiple devices simultaneously.


Wall Mount Designed for Highly-efficient Wireless Coverage
As it is a highly-reliable industrial wall-mount design, the WDAP-W7200AC can be firmly installed on the wall conveniently. The compact, rugged IP30 metal wall-mounted housing fits easily in any space-limited location and also makes it strong enough to withstand any harsh, industrial environment. It adopts “Front Access” design, making the installing, cable wiring, LED monitoring and maintenance very easy for technicians to manage. The WDAP-W7200AC provides fixed and magnetic wall mounting installation methods making its deployment more flexible and highly efficient.



Comprehensive Wireless Security
In aspect of security, besides 64/128-bit WEP encryption, the WDAP-W7200AC is integrated with WPA / WPA2, WPA-PSK / WPA2-PSK and 802.1x RADIUS authorization to secure and protect your wireless LAN. It provides the wireless MAC filtering and SSID broadcast control to consolidate the wireless network security and prevent unauthorized wireless connection. Being an access point, the WDAP-W7200AC supports multiple SSIDs (10 sets of SSIDs). Moreover, its Wi-Fi Multimedia (WMM) mechanism provides enhanced QoS over wireless connection for better performance in multimedia transmission like on-line gaming and video streaming, which are classified as a top priority.






Flexible Enough to Achieve Various Applications
The WDAP-W7200AC supports AP, WDS Bridge, and Repeater modes, through which it provides more flexibility for users when wireless network is established. Compared with general wireless access point, the WDAP-W7200AC offers more powerful and flexible capability for wireless clients.



Flexible Deployment with PoE Feature
Compliant with the IEEE 802.3at Power over Ethernet Plus standard, the WDAP-W7200AC can be powered and networked over a single UTP cable. It thus reduces the needs of extra cables and electrical outlets on the wall, ceiling or any other place where they may not be found or may be difficult to reach. Thus, the wireless network deployment becomes more flexible.



Deployment Simplified through Centralized Management
The WDAP-W7200AC supports AP controller which can be switched to “managed AP” mode and thus can be centrally managed by PLANET WAPC-1232HP smart AP controller. It will certainly benefit the system integrators when the scale of the wireless network gets bigger. Furthermore, with user-friendly Web UI and Planet Smart Discovery supported, the WDAP-W7200AC is convenient to be managed and configured remotely in a small business wireless network.




Industrial Wall-mount Design Perfect for Public Facilities
The WDAP-W7200AC adopts the latest 802.11ac technology to provide extremely high-speed and powerful dual band wireless access without signal interference. Its durable and sturdy IP30 metal housing and wall-mount design make it strong enough to withstand any harshly industrial environments and flexible enough to be mounted in any wall. The WDAP-W7200AC supports standard 802.3at PoE power scheme, effectively reducing the cabling cost.


Ease of Deployment with PLANET AP Controller
The WDAP-W7200AC, with the Planet Smart Discovery Utility and WAPC-1232HP AP Controller supported, enables a small or medium wireless network to be simultaneously configured to minimize deployment time, effort and cost. No expensive instruments or complex back-end subscriber managed systems are required for deployment, thus bringing the most convenience to system administrators or machine operators.




Standard Compliant Hardware Interface


  • Complies with IEEE 802.11ac (draft 2.0) and IEEE 802.11a/b/g/n standards
  • 1 xZoiper Click2Dial 10/100/1000NLBASE-TX port with PoE supporting 802.3at PD (Powered Device)
  • Conforms to IEEE standard 802.3at PoE power scheme

RF Interface Characteristics


  • 2.4GHz (802.11b/g/n) and 5GHz (802.11a/n/ac) concurrent dual band capable of carrying heavy load traffic
  • 5dBi high-gain antennas with flexible RP-SMA connectors easily expanding wireless coverage
  • 2T2R MIMO technology for enhanced performance
  • High speed up to 1.2Gbps (300Mbps for 2.4GHz + 867Mbps for 5GHz) wireless data rate

Comprehensive Wireless Advanced Features


  • Multiple Wireless Modes: AP, Client, WDS PtP/ PtMP, WDS Repeater, Universal Repeater
  • Up to 10 multiple-SSIDs (2.4GHz+5GHz) to allow users to access different networks through a single AP
  • Supports WMM (Wi-Fi Multimedia) and wireless QoS to enhance the efficiency of multimedia application
  • Supports IAPP (Inter Access Point Protocol) wireless roaming to enable clients to roam across multiple APs
  • Provides 5-level Transmitting Power Control to adapt various environments
  • Wireless schedule allows administrators to enforce time-based internet access
  • Self-healing (Schedule Reboot) mechanism for reliable connection

Secure Network Connection


  • Advanced security: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK (TKIP/AES encryption) and 802.1x RADIUS Authentication
  • Supports MAC address filtering

Industrial Case & Centralized Management


  • IP30 metal case protection and -10 to 60 degrees C operating temperature fulfill applications in industrial environments
  • Flexible deployment with wall-mount design and standard 802.3at PoE/ PD supported
  • Web-based UI and Quick Setup Wizard for easy configuration
  • Supports AP controller to enable administrator to configure and monitor multiple APs simultaneously
  • Supports SNMP-based management interface
  • System status monitoring includes DHCP Client and System Log

Hardware Specifications

  • Interfaces LAN:
    1 xZoiper Click2Dial 10/100/1000NLBASE-T RJ45 port
    Auto-negotiation and auto MDI/MDI-X
  • Antennas Gain:
    2 x 2.4GHz 5dBi SMA antenna
    2 x 5GHz 5dBi SMA antenna
  • Reset Button Press over 5 seconds to reset the device to factory default
  • LED Indicators PWR
    Allow LED to turn off via software control
  • Material Metal
  • Dimensions (L x W x H) 148 x 41 x 140 mm
  • Weight 470g
  • Power Requirements 802.3at PoE, 48-56V DC input
  • Mounting Wall mount

Wireless Interface Specifications


  • Standard IEEE 802.11ac (draft 2.0) 5GHz
    IEEE 802.11a/n 5GHz
    IEEE 802.11b/g/n 2.4GHz
  • Antenna Structure 802.11ac: 2T2R MU-MIMO
    802.11n: 2T2R MIMO
  • Modulation DSSS
    Data Modulation 802.11ac: OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM)
    802.11a/g/n: OFDM (BPSK / QPSK / 16QAM / 64QAM)
    802.11b: DSSS (DBPSK / DQPSK / CCK)
  • Band Mode 2.4G / 5G concurrent mode
  • Frequency Range 2.4GHz:
    America — FCC: 2.412~2.462GHz
    Europe — ETSI: 2.412~2.484GHz5GHz:
    America — FCC: 5.180~5.240GHz, 5.725~5.850GHz
    Europe — ETSI: 5.180~5.240GHz
  • Operating Channels 2.4GHz:
    America — FCC: 1~11
    Europe — ETSI: 1~135GHz:
    America — FCC:
    36, 40, 44, 48, 149, 153, 157, 161, 165
    Europe — ETSI:
    36, 40, 44, 48
    5GHz channel list will vary in different countries according to their regulations.
  • Channel Width 802.11ac: 20/40/80MHz
    802.11n: 20/40MHz
  • Transmission Distance 802.11ac (draft): up to 30m
    802.11n: up to 70m
    802.11g: up to 30mThe estimated transmission distance is based on the theory. The actual distance will vary in different environments.
  • Max. RF Power 5GHz:
    802.11ac (VHT20): 22dBm
    802.11ac (VHT40): 22dBm
    802.11ac (VHT80): 22dBm
    802.11n (HT20): 22dBm
    802.11n (HT40): 22dBm
    802.11a: 22dBm2.4GHz:
    802.11n: 17 ±2.5dBm
    802.11b/g: 20 ±2.5dBm
  • Receive Sensitivity 5GHz:
    802.11ac (VHT20): -91dBm @ Nss1-MCS0, -64dBm @ Nss2-MCS8
    802.11ac (VHT40): -89dBm @ Nss1-MCS0, -59dBm @ Nss2-MCS9
    802.11ac (VHT80): -86dBm @ Nss1-MCS0, -56dBm @ Nss2-MCS9
    802.11n (HT20): -92dBm @ MCS0, -71dBm @ MCS7
    802.11n (HT40): -89dBm @ MCS0, -66dBm @ MCS15
    802.11a: -93 @ 6Mbps, -75dBm @ 54Mbps2.4GHz:
    802.11n 20MHz (MCS7): -69dBm @10% PER
    802.11n 40MHz (MCS15): -66dBm @10% PER
    802.11g (54Mbps): -74dBm @10% PER
    802.11b (11Mbps): -88dBm @10% PER

Software Features

  • Wireless Mode Universal Repeater (AP+Client)
    Repeater (WDS+AP)
    AP (Access Point) ?
    WDS PTP (Point to Point)
    WDS PTMP (Point to Multipoint)
  • Encryption Security: WEP (64/128-bit) encryption security
    802.1x RADIUS Authentication
  • Wireless Security Wireless MAC address filtering
    Supports WPS (Wi-Fi Protected Setup)
    Enable/ Disable SSID Broadcast
  • Wireless Advanced WMM (Wi-Fi Multimedia), max. associated station number
    Multiple SSIDs: up to 5 at 2.4GHz and 5 at 5GHz
    Wireless Isolation: Enable it to isolate each connected wireless
    client from communicating with each other
    IAPP (Inter Access Point Protocol): 802.11f wireless roaming
    Provides wireless statistics
  • Max. Clients Wired: 253
    2.4GHz Wireless: 32
    5GHz Wireless: 32
  • LAN : Built-in DHCP server supporting static IP address distribution
    Supports UPnP
    Supports 802.1d Spanning Tree
  • System Management: Web-based (HTTP) management interface
    SNTP synchronization
    Easy firmware upgrade
    Supports scheduled reboot
    Supports Smart Discovery Utility
    Supports WAPC-1232HP AP controller

Standards Conformance

  • IEEEStandards: IEEE 802.11ac (draft 2.0, 2T2R, up to 867Mbps)
    IEEE 802.11n (2T2R, up to 300Mbps)
    IEEE 802.11g
    IEEE 802.11b
    IEEE 802.11i
    IEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX
    IEEE 802.3ab 1000BASE-T
    IEEE 802.3x flow control
  • Other Protocols and Standards CSMA/CA, CSMA/CD, TCP/IP, DHCP, ICMP, SNTP

Environment & Certification

  • Temperature Operating: -10 ~ 60 degrees C
  • Storage: -20 ~ 60 degrees C
  • Humidity Operating: 10 ~ 90% (non-condensing)
  • Storage: 5 ~ 90% (non-condensing)
  • Regulatory FCC, CE