Model: Planet IGS-5225-4UP1T2S

 

Industrial L2+ 4-Port 10/100/1000T Ultra PoE + 1-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch

SKU: IGS52254UP1T2S Categories: , ,

Model: Planet IGS-5225-4UP1T2S

 

Industrial L2+ 4-Port 10/100/1000T Ultra PoE + 1-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch

 

Applications

Industrial Area Department/Workgroup PoE Switch

Providing up to 4 Ultra PoE, in-line power interfaces, the IGS-5225-4UP1T2S can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 4 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-5225-4UP1T2S makes the installation of IP cameras or wireless AP easier and more efficient.

 

Gigabit Ultra PoE and PoE+ Network Deployment

To control the power system of your networking devices, the IGS-5225-4UP1T2S can directly co-work with network devices such as PoE IP phone to build VoIP network in the office. The Ultra PoE switch can be directly connected to any third-party IEEE 802.3af/802.3at compliant devices installed within 100 meters. Furthermore, the IGS-5225-4UP1T2S can extend much longer distance by using PLANET PoE Extender for powering up the PoE PD which can be installed over more than 100 meters away.

 

Features

Physical Port

  • 4 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with Ultra PoE Injector
  • 1 10/100/1000BASE-T Gigabit Ethernet RJ45 ports ports
  • 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection
  • One RJ45 console interface for basic management and setup

Power over Ethernet

  • Ultra Power over Ethernet end-span/mid-span PSE
  • Up to 60 watts of power on 4-pair UTP
  • Backward compatible with IEEE 802.3at/af PD device
  • Up to 4 ports of IEEE 802.3af/IEEE 802.3at/Ultra PoE devices powered
  • Supports PoE power up to 72 watts for each PoE port
  • 240-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE management features:
    • – Total PoE power budget control
    • – Per port PoE function enable/disable
    • – PoE admin-mode control
    • – PoE port power feeding priority
    • – Per PoE port power limit
    • – PD classification detection
  • Intelligent PoE features:
    • – Temperature threshold control
    • – PoE usage threshold control
    • – PD alive check
    • – PoE schedule

Industrial Case and Installation

  • IP30 aluminum case
  • DIN rail and wall-mount design
  • 48~56V DC, redundant power with polarity reverse protect function
  • Supports 6000V DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature

Digital Input and Digital Output

  • 2 Digital Input (DI)
  • 2 Digital Output (DO)
  • Integrate sensors into auto alarm system
  • Transfer alarm to IP network via email and SNMP trap

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm Control support:
    • – Broadcast/Multicast/Unicast
  • Supports VLAN:
    • – IEEE 802.1Q tagged VLAN
    • – Up to 255 VLANs groups, out of 4095 VLAN IDs
    • – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    • – Private VLAN Edge (PVE)
    • – Protocol-based VLAN
    • – MAC-based VLAN
    • – Voice VLAN
  • Supports Spanning Tree Protocol:
    • – IEEE 802.1D Spanning Tree Protocol (STP)
    • – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
    • – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
    • – BPDU Guard
  • Supports Link Aggregation:
    • – 802.3ad Link Aggregation Control Protocol (LACP)
    • – Cisco ether-channel (static trunk)
    • – Maximum 3 trunk groups with 3 ports per trunk group
    • – Up to 6Gbps bandwidth (duplex mode)
  • Provides port mirror (1-to-1)
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops
  • Supports ERPS (Ethernet Ring Protection Switching)

Layer 3 IP Routing Features

  • Supports maximum 32 software static routes and route summarization

Quality of Service

  • Ingress Shaper and Egress Rate Limit per port bandwidth control
  • 8 priority queues on all switch ports
  • Traffic classification
    • – IEEE 802.1p CoS
    • – IP TOS/DSCP/IP precedence
    • – IP TCP/UDP port number
    • – Typical network application
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports QoS and In/Out bandwidth control on each port
  • Traffic-policing policies on the switch port
  • DSCP remarking

Multicast

  • Supports IGMP snooping v1, v2 and v3
  • Supports MLD snooping v1 and v2
  • Querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering
  • MVR (Multicast VLAN Registration)

Security

  • IEEE 802.1X Port-based/MAC-based network access authentication
  • Built-in RADIUS client to cooperate with the RADIUS servers
  • TACACS+ login users access authentication
  • RADIUS/TACACS+ users access authentication
  • IP-based Access Control List (ACL)
  • MAC-based Access Control List
  • Source MAC/IP address binding
  • DHCP snooping to filter distrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guard prevents IP spoofing attacks
  • IP address access management to prevent unauthorized intruder

Management

  • Switch Management Interfaces:
    • – Console/Telnet Command Line Interface
    • – Web switch management
    • – SNMP v1 and v2c switch management
    • – SSH/SSL and SNMP v3 secure access
  • Four RMON groups (history, statistics, alarms, and events)
  • IPv6 IP address/NTP/DNS management
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • Firmware upload/download via HTTP/TFTP
  • DHCP Relay
  • DHCP Option 82
  • User Privilege levels control
  • Network Time Protocol (NTP)
  • Link Layer Discovery Protocol (LLDP)
  • SFP-DDM (Digital Diagnostic Monitor)
  • Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
  • Reset button for system reboot or reset to factory default
  • PLANET Smart Discovery Utility for deployment management

Specifications

 

Hardware Specifications
Copper Ports5 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports