Model: Planet IFGS-1022HPT

 

Industrial 8-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Ethernet Switch (-40~75 degrees C)

SKU: IFGS1022HPT Categories: , ,

Model: Planet IFGS-1022HPT

 

Industrial 8-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Ethernet Switch (-40~75 degrees C)

 

Features

Physical Port

  • Eight 10/100BASE-TX Fast Ethernet RJ45 ports with IEEE 802.3at/af PoE+ Injector (Port-1 to Port-8)
  • Two 10/100/1000BASE-T Gigabit Ethernet RJ45 ports (Port-9 and Port-10)
  • Two 1000BASE-X mini-GBIC/SFP slots for SFP type auto detection (Port-9 and Port-10)

Power over Ethernet

  • Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 8 ports of IEEE 802.3af/802.3at devices powered
  • 240-watt PoE budget
  • Supports PoE power up to 30 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters

Industrial Case and Installation

  • IP30 metal case
  • DIN rail and wall-mount design
  • 48~56V DC, redundant power with polarity reverse protect function
  • Supports 6000V DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature

Switching

  • Hardware-based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI/MDI-X
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • 16K MAC address table size
  • 10K jumbo frame
  • IEEE 802.1Q VLAN transparency
  • Hardware DIP switch for “Standard” and “Extend” mode selection; the “Extend” mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol
Specifications
Fast Ethernet Copper PortsEight 10/100BASE-TX RJ45 auto-MDI/MDI-X ports (Port-1 to Port-8)
Gigabit Ethernet Copper PortsTwo 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports 
(shared with Port-9 and Port-10)
SFP/mini-GBIC SlotsTwo 1000BASE-SX/LX/BX SFP interfaces (shared with Port-9 and Port-10)
PoE Injector PortEight ports with 802.3af/802.3at PoE+ injector function (Port-1 to Port-8)
Switch ArchitectureStore-and-Forward
Switch Fabric5.6Gbps/non-blocking
Switch Throughput@64 bytes4.1Mpps @64 bytes
MAC Address Table16K entries
Shared Data Buffer4Mb SRAM
Flow ControlIEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame10 Kbytes
DIP Switch (Port-1 to Port-8)Standard mode: 30-watt PoE transmit distance of 100m at speed of 10/100Mbps
Extend mode: 30-watt PoE transmit distance of 250m at speed of 10Mbps
LED3 x LED for System and Power: 
 ■ Green: DC Power 1
 ■ Green: DC Power 2
 ■ Red : Power Fault Alarm
2 x LED for PoE Copper Port (Port-1~Port-8):
 ■ Green: LNK/ACT (10/100Mbps)
 ■ Orange: PoE-In-Use
2 x LED for 10/100/1000T Copper Port (Port-9~Port-10):
 ■ Green: LNK/ACT
 ■ Orange: 1000
2 x LED for per mini-GBIC interface (Port-9~Port-10)
 ■ Orange: LNK/ACT
 ■ Green: 1000
ConnectorRemovable 6-pin terminal block
 ■ Pin 1/2 for Power 1
 ■ Pin 3/4 for power fault alarm
 ■ Pin 5/6 for Power 2
AlarmOne relay output for power failure.
Alarm relay current carry ability: 1A @ 24V AC
Power Requirements48~56V DC, 5.5A (max.) (>51V DC for PoE+ output recommended)
Power Consumption/ Dissipation6.4 watts, 21BTU (Standby without PoE function) at DC 56V power input
8.2 watts, 27BTU (Full loading without PoE function) at DC 56V power input
241 watts, 832BTU (Full loading with PoE function) at DC 56V power input
Dimensions (W x D x H)72 x 107 x 161 mm
Weight1034g
ESD Protection6KV DC
EnclosureIP30 aluminum case
InstallationDIN-rail kit and wall-mount kit
Power over Ethernet
PoE StandardIEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply TypeEnd-span
Power Pin Assignment1/2(+), 3/6(-)
PoE Power OutputIEEE 802.3af Standard
– Per port 48V~51V DC (depending on the power supply), max. 15.4 watts 
IEEE 802.3at Standard
– Per port 51V~56V DC (depending on the power supply), max. 30 watts
PoE Power BudgetDual power input: maximum 240W (depending on power input)
Max. Number of Class 2 PDs8
Max. Number of Class 3 PDs8
Max. Number of Class 4 PDs8
Standards Conformance
Regulatory ComplianceFCC Part 15 Class A, CE
Stability TestingIEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
Standards ComplianceIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T 
IEEE 802.3z Gigabit SX/LX
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
Environment
Operating Temperature-40 ~ 75 degrees C
Storage Temperature-40 ~ 85 degrees C
Humidity5 ~ 95% (non-condensing)