Physical Port

  • 10-Port 10/100/1000BASE-T Gigabit RJ45 copper with 8-Port IEEE 802.3at PoE Injector (Port-1 to Port-8)
  • 2 100/1000BASE-X mini-GBIC/SFP slots, SFP type auto detection
  • RJ45 type console interface for basic management and setup

Wireless AP Management

  • Automatically discovers managed APs, up to 32 units
  • Locally maintains configuration profiles for all managed APs
  • Centrally monitors all managed APs’ statuses and associated client list
  • Eight built-in 802.3at PoE+ ports to directly manage AP power control
  • AP alive check for automatic operating status diagnostic

Power over Ethernet

  • Complies with IEEE 802.3at Power over Ethernet Plus
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 8 ports for IEEE 802.3af/at devices powered
  • Supports PoE power up to 30.8 watts for each PoE port
  • Auto detects powered device (PD)
  • Remote power feeding up to 100m
  • PoE Management
    • – Total PoE power budget control
    • – Per port PoE function enable/disable
    • – PoE Port Power feeding priority
    • – Per PoE port power limitation
    • – PD classification detection
    • – PD alive-check
SKU: WAPC1232HP Categories: ,

Layer 2 Features

  • Storm Control support
    • – Broadcast / Multicast / Unicast / Unknown unicast
  • Supports VLAN
    • – IEEE 802.1Q tagged VLAN
    • – Up to 255 VLANs groups, out of 4095 VLAN IDs
    • – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    • – Private VLAN Edge (PVE)
    • – Protocol-based VLAN
    • – MAC-based VLAN
    • – IP Subnet-based VLAN
    • – Voice VLAN
    • – Management VLAN
  • Supports Spanning Tree Protocol
    • – STP, IEEE 802.1D Spanning Tree Protocol
    • – RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
    • – MSTP, IEEE 802.1s Multiple Spanning Tree Protocol (via VLAN)
    • – STP BPDU Guard and BPDU filtering
  • Supports Link Aggregation
    • – IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    • – Cisco ether-channel (static trunk)
    • – Maximum 4 trunk groups, up to 4 ports per trunk group
    • – Up to 8Gbps bandwidth (full duplex mode)
  • Provides port mirror (many-to-1)
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops

Layer 3 IP Routing Features

  • Supports maximum 32 software static routes and route summarization

Quality of Service

  • Ingress Shaper and Egress Rate Limit per port bandwidth control
  • 8 priority queues on all switch ports
  • Traffic classification
    • – IEEE 802.1p CoS
    • – TOS / DSCP / IP Precedence of IPv4/IPv6 packets
    • – IP TCP/UDP port number
    • – Typical network application
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Traffic-policing policies on the switch port
  • DSCP remarking

Multicast

  • Supports IGMP Snooping v1, v2 and v3 for IPv4 multicasting network
  • Supports MLD Snooping v1 and v2 for IPv6 multicasting network
  • Querier mode support
  • IGMP Snooping port filtering
  • MLD Snooping port filtering
  • MVR (Multicast VLAN Registration)

Security

  • Authentication
    • – IEEE 802.1x Port-based / MAC-based network access authentication
    • – Built-in RADIUS client to co-operate with the RADIUS servers
    • – TACACS+ login users access authentication
    • – RADIUS / TACACS+ users access authentication
  • Access Control List
    • – IPv4 / IPv6 IP-based ACL
    • – MAC-based ACL
  • Source MAC / IP address binding
  • Port Security for Source MAC address entries filtering
  • DHCP Snooping to filter distrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guard prevents IP spoofing attacks
  • Auto DoS rule to defend DoS attack
  • IP address access management to prevent unauthorized intruder

Management

  • IPv4 and IPv6 dual stack management
  • Switch management interfaces
    • – Console / Telnet command line interface
    • – Web switch management
    • – SNMP v1, v2c, and v3 switch management
    • – SSH / SSL secure access
  • User privilege levels control
  • System maintenance
    • – Firmware upload/download via HTTP / TFTP
    • – Configuration upload / download through web interface
    • – Dual images
    • – Reset button for system reboot or reset to factory default
    • – Built-in Trivial File Transfer Protocol (TFTP) client
  • Four RMON groups (history, statistics, alarms and events)
  • IPv6 IP Address / NTP / DNS management and ICMPv6
  • BOOTP and DHCP for IP address assignment
  • DHCP Relay
  • DHCP Option82
  • NTP (Network Time Protocol)
  • Link Layer Discovery Protocol (LLDP) and LLDP-MED
  • Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
  • PLANET Smart Discovery Utility for deployment management
HARDWARE SPECIFICATIONS
Copper Ports10 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots2 1000BASE-SX/LX/BX SFP interfaces (Port-11 and Port-12)
Supports 100/1000Mbps dual mode and DDM
Console Port1 x RS232-to-RJ45 serial port (115200, 8, N, 1)
Switch ArchitectureStore-and-Forward
Switch Fabric24Gbps / non-blocking
Switch Throughput17.76Mpps@64 bytes
Address Table8K entries, automatic source address learning and ageing
Shared Data Buffer1392 kilobytes
ESD Protection6KV
Flow ControlIEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame9Kbytes
Reset Button< 5 seconds: System reboot
> 5 seconds: Factory default
Dimensions (W x D x H)330 x 200 x 43.5 mm, 1U height
Weight2kg
LEDPower, fan alert,
10/100/1000 Link / Act per RJ45 port,
100/1000 Link / Act per SFP port,
PoE-in-Use for Port 1~ 8
Power ConsumptionMax. 320 watts / 1091 BTU
Power Requirements100~240V AC, 50/60Hz
EnclosureMetal
FanSmart fan x 1 (Speed depending on operating temperature)
WIRELESS AP MANAGEMENT
Maximum Managed APs32
Maximum AP Groups10
Maximum APs per AP Group32
Compatible Access Points¦ WDAP-C7200AC
¦ WDAP-W7200AC
¦ WNAP-C3220A
¦ WNAP-W2201A
Encryption Security¦ WEP (64/128-bit) encryption security
¦ WPA Personal / Enterprise (TKIP / AES)
¦ WPA2 Personal / Enterprise (TKIP / AES)
¦ Enterprise Class 802.1x
Centralized AP Management¦ AP auto discovery
¦ Remote AP power reboot
¦ AP auto IP assignment
¦ AP group management
¦ AP status monitoring
¦ AP real-time traffic monitoring
¦ AP device name / location editing
POWER OVER ETHERNET
PoE StandardIEEE 802.3af PoE / 802.3at PoE+ PSE
PoE Power Supply TypeEnd-span
PoE Power OutputPer port 56V DC, max. 30.8 watts
Power Pin Assignment1/2(+), 3/6(-)
PoE Power Budget240 watts (max.) @ 25 degrees C
200 watts (max.) @ 50 degrees C
PoE AbilityPD @ 7 watts:8 units
PD @ 15.4 watts:8 units
PD @ 30.8 watts:8 units
LAYER 2 FUNCTIONS
Port ConfigurationPort disable / enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable / enable
Port StatusDisplay each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status
Port MirroringTX / RX / both
Many-to-1 monitor
VLAN802.1Q tagged based VLAN
802.1ad Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4094 VLAN IDs
Link AggregationIEEE 802.3ad LACP / static trunk
5 trunk groups with each 5-port trunk supported
Spanning Tree ProtocolSTP, IEEE 802.1D Spanning Tree Protocol
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
QoSTraffic classification based, strict priority and WRR
8-level priority for switching
– Port number 
– 802.1p priority
– 802.1Q VLAN tag
– DSCP/TOS field in IP packet
IGMP SnoopingIGMP (v1/v2/v3) Snooping, up to 255 multicast groups
IGMP Querier mode support
MLD SnoopingMLD (v1/v2) Snooping, up to 255 multicast groups
MLD Querier mode support
Access Control ListIP-based ACL / MAC-based ACL
Up to 256 entries
Bandwidth ControlPer port bandwidth control
Ingress: 100Kbps~1000Mbps
Egress: 100Kbps~1000Mbps
LAYER 3 FUNCTIONS
IP InterfacesMax. 8 VLAN interfaces
Routing TableMax. 32 routing entries
Routing ProtocolsIPv4 software static routing
IPv6 software static routing
MANAGEMENT FUNCTIONS
Basic Management InterfacesConsole / Telnet / Web browser / SNMP v1, v2c
Secure Management InterfacesSSH, SSL, SNMP v3
SNMP MIBsRFC 1213 MIB-II
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2819 RMON MIB (Group 1, 2, 3 and 9)
RFC 2737 Entity MIB
RFC 2618 RADIUS Client MIB
RFC 2863 IF-MIB
RFC 2933 IGMP-STD-MIB
RFC 3411 SNMP-Frameworks-MIB
RFC 4292 IP Forward MIB
RFC 4293 IP MIB
RFC 4836 MAU-MIB
IEEE 802.1X PAE
LLDP
Power over Ethernet MIB
STANDARDS CONFORMANCE
Regulatory ComplianceFCC Part 15 Class A, CE
Standards ComplianceIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1ad Q-in-Q VLAN stacking 
IEEE 802.1X Port Authentication Network Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.1ab LLDP
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
FRC 3810 MLD version 2
ENVIRONMENTS
OperatingTemperature: 0 ~ 50 degrees C
Relative Humidity: 20 ~ 95% (non-condensing)
StorageTemperature: -20 ~ 70 degrees C
Relative Humidity: 20 ~ 95% (non-condensing)